Account:
Automotive Contract Stamper, IN

Metalforming Operation:
Stamp, form, and severe drawing up to 7" of motor mounting braket in a six stage progressive die.

Product:
OAKFORM^® DSS 6900HD stamping and drawing fluid at 25%

Tooling Material:
Carbide

Workpiece Material and Thickness:
0.250" Cold rolled steel, DQAK

Previous Fluid and Tool Life:
Customer wanted to replace competitor’s soluble oil due to short term corrosion protection, poor lubricity, and high usage concentration.

• OAKFORM DSS 6900HD provided approximately 90 days corrosion protection in this application.
• Lower use concentration allowed OAKFORM DSS 6900HD to be applied using airless spray applicators.
• Provided increased lubricity in this severe application.